EMERSON KJ2006X1-Bk1

EMERSON KJ2006X1-Bk1 Product Details

The Emerson DeltaV KJ2006X1-Bk1 is a Virtual I/O Module designed for use within the Emerson DeltaV Distributed Control System (DCS). It provides a software interface for I/O communication within the DeltaV system, allowing for flexible and scalable integration of field devices. This module is identified by part number KJ2006X1-BK1 and may also be referenced by 12P4689X012.

Key Features:

• Virtual I/O Interface: Enables software-based configuration and management of I/O points.

• DeltaV System Integration: Seamlessly integrates with the Emerson DeltaV DCS architecture.

• Communication Bridge: Facilitates communication between the DeltaV controller and various I/O devices.

• Scalability: Supports expansion of I/O capabilities within the DeltaV system.

• Redundancy Options: In some configurations, redundancy may be supported for increased system availability.

Product Parameters

While specific detailed parameters can vary based on the DeltaV system configuration and associated hardware, here are some general specifications and parameters associated with the KJ2006X1-Bk1 Virtual I/O Module:

• Function: Software interface for I/O communication.

• Series: DeltaV

• Power Specifications: Typically operates on +5 VDC local bus power (refer to specific system documentation for current draw, which can be around 1.4 A in some similar modules). Some listings also mention 303VDC 500mA.

• Ambient Temperature: Operating temperature ranges from -40°C to +60°C (-40°F to 140°F) in some similar modules.

• Humidity: Relative humidity range of 5 to 95% non-condensing is common.

• Vibration: Withstands vibration levels such as 1 mm peak-to-peak from 5 to 16 Hz and 0.5 g from 16 to 150 Hz (these values can vary).

• Shock: Can typically withstand shocks up to 10 g half-sine wave for 11 ms.

• Airborne Contaminants: Designed to meet ISA-S71.04 –1985 Airborne Contaminants Class G3.

• Weight: Approximately 0.93 lbs (0.42 kg) in some listings.

• Dimensions: Example dimensions are around 4.4 x 11.4 x 12.7 cm.

Note: For precise technical specifications relevant to your specific installation, always consult the official Emerson DeltaV hardware documentation for the KJ2006X1-Bk1 module.

Product Advantages

The Emerson KJ2006X1-Bk1 Virtual I/O Module offers several advantages within the DeltaV DCS:

• Flexibility in I/O Configuration: Provides a software-defined approach to managing I/O, allowing for easier changes and expansions without physical rewiring in some cases.

• Scalability of Control Systems: Enables the DeltaV system to easily accommodate changes in the number and type of I/O points required for a process.

• Simplified System Design: Can help streamline the design and implementation of control systems by abstracting the physical I/O hardware to a software layer.

• Integration with DeltaV Features: Fully compatible with the advanced control, diagnostic, and asset management capabilities of the DeltaV DCS.

• Potential for Cost Savings: By providing a virtual layer, it can optimize the use of physical I/O hardware and potentially reduce the need for অতিরিক্ত hardware in certain scenarios.

• Enhanced Operational Efficiency: Contributes to the overall efficiency of the DeltaV system, which is designed to reduce downtime and improve throughput.

• Improved Decision-Making: As part of the DeltaV system, it supports real-time analytics, empowering operators and engineers with actionable insights.